Technical capabilities


The company manufactures the following types of chemical equipment:



Capacitive:

Capacitive devices for receiving, storing and dispensing of liquid and gaseous products with a nominal volume of up to 100 m³, with nominal pressure up to 16 MPa; up to 3,200 mm diameter, weighing up to 20,000 kg, including:

  • horizontal welded washers with elliptic bottoms.
  • horizontal welded washers with elliptic bottoms with tube bundles.
  • Vertical devices welded with elliptic bottoms.
  • Vertical devices welded with elliptic bottoms, with jacket.
  • Vertical machines with elliptical bottom and lid.
  • Vertical machines with elliptical bottom and lid, with jacket.
  • Vertical units with bottom welded conical (140˚) non-processed and top elliptical bottoms.
  • Vertical units with bottom welded conical (140˚) and flanged upper elliptical bottoms, with the shirt.
  • Vertical machines with tapered (140˚) unbeaded bottom, and elliptical lid.
  • Vertical welded devices with conical (140˚) unbeaded bottom.
  • Vertical welded devices with conical (140˚) unbeaded bottom, with a submersible pump.
  • Vertical welded devices with tapered (140˚) unprocessed and upper flat bottoms.
  • Vertical welded devices with tapered (140˚) unprocessed and upper flat bottoms, with the coil.
  • Vertical welded devices with flat bottoms.
  • Vertical welded devices with flat bottoms, with the coil.
  • Vertical apparatuses with mixing devices.
  • Vertical apparatuses with mixing devices, with jacket.
  • Vertical apparatuses with mixing devices, with jacket, with the coil.

HEAT EXCHANGING:

  • Shell and tube heat exchangers with fixed tube plates and exchangers with temperature compensator on casing (heat exchangers TNG, TNV, TAG, TKB, refrigerators such as CNG, CNV, HKB, CNV; capacitors AMG type, UIC, KKB, CGC; evaporators such as INV, the SCR and their modifications).
  • Shell and tube heat exchangers with floating head (coils type TPG, TPV, refrigerators CPH type, HPV; Capacitors CNG CPV) and the exchanger with U-shaped tubes (heat exchangers) and their modifications. Manufacturing of non-standard heat exchangers on the basis of individual technical customer projects.

The quality of manufactured line heat exchanger with fixed tube sheets and shell and tubes with temperature compensator on casing meets the requirements of GOST R 52630-2012 and TU 3612-024-0022302-02, with the technical regulations of the Customs Union TR CU 010/2011 "On the safety of machinery and equipment" and TR CU 032/2013 "on safety equipment working under excessive pressure", and is also certified to conform with the Customs Union of № RU C-RU.MH32.V.00194, № RU C-RU.MH32.V.00195 "Declaration of conformity.

Column equipment:

Column equipment designed to conduct heat and mass transfer processes. Manufacturing of welded column equipment with internal contact devices of various types.

The quality of manufactured devices of the columns complies with GOST R 52630-2012 and TU 3611-143-07510508-2015, with the technical regulations of the Customs Union TR CU 010/2011 "On the safety of machinery and equipment" and TR CU 032/2013 "On safety of working with pressurized equipment ", as obtained in certificates of conformity of the Customs Union of № RU C-RU.MH32.V.00275, № RU C-RU.MH32.V.00281


Возврат к списку